If the inner walls of your wellbores keep clogging up with mud and other debris, it can quickly slow down production in your construction site. In this case, you'll need to find a way to remove the debris without damaging or collapsing your wellbores. Learn why your wellbores keep clogging up and how to scrape away the debris below.

Why Do You Wellbores Clog Up?

Wellbores are holes in the ground that allow you to access oil, minerals, water, and other natural resources. Their inner casings or cavities can build up with mud, minerals, and other debris over time. The blockages can make it difficult for you to access and extract natural substances from the earth.

Wellbores clog up for a number of different reasons. Rainwater can enter the holes and turn the soil into mud, or pieces of minerals and rocks can become embedded in the casings of your wellbores. Wet soil can seep inside the openings of the holes as well. Each of these issues can wreak havoc on your production times and costs.

You can solve the problems above by using an inner wall casing scraper.

What Should You Know About Scrapers?

Inner wall casing scrapers are mechanical devices that remove many types of debris from wellbore holes, including mud and algae. Scrapers come with a number of features that help them break through, slice, or collapse debris, including sharp cutting blades. The cutting blades generally sit on all sides of the scraper, which allows the device to clean every area of the wellbore.

Scrapers might also come with grooved metal surfaces that allow them to crush and break debris into tiny pieces. Grooved inner wall casing scrapers may or may not rotate to get the job done. The devices usually remove debris by scrubbing or rubbing against the insides of the wellbore holes. Grooved scrapers may be better for you if you need to clean thick mud and heavy mineral debris from your wellbores.

Most scrapers rely on drill bits to operate. You'll need to attach or connect your scrapers directly to the outer casings of your drill bits. You activate the scrapers by placing the drill bits directly into the wellbore holes. Once you remove the drill bits from the holes, the scrapers stop working.

If you're interested in using scrapers for your wellbore holes, consult an industrial equipment and supply manufacturer for more information. A supplier can help you select scrapers that work best for your clogged wellbore holes. For more information, check out this website, bilcotools.com, or similar sites regarding inner wall casing scrapers.